Arrives in 7–14 business days
See your full total before you pay
Pay by card — no PayPal account needed
Full back-seat protection that holds its shape, stays put, and folds down so a person can ride along — designed in Seoul and rebuilt from real owner feedback into Version 3.0.
Most full-bench covers leave no room for a human. This one folds down on either side, so you switch modes in seconds. No unclipping, no reinstalling.
Whole bench, wall to wall.
One side folds — one seat opens up.
Both sides fold — dog rides in the middle.
We kept what owners liked and re-engineered what they didn't.
The floor isn't a single sheet of fabric. It's a nine-layer build with PP reinforcement panels sandwiched between EPE foam — cushioned on top for paws, grippy underneath so it doesn't travel.
4 Panel cover 5 EPE foam 6 PP reinforcement panel
7 EPE foam 8 Panel cover 9 Non-slip backing
Reinforcement panels keep the base flat even when your dog climbs on.
EPE foam on both sides cushions long rides.
A reinforcement panel bridges the gap in front of the bench, so the dip between the seat and the floor turns into flat, supported space. Big dogs get room to stretch out instead of bracing against a drop.
Slim poles slide into a sleeve along the top of each wall. The sides stay upright against the doors instead of slumping inward — the single most-requested fix from our owners.
Ripstop is woven in a tight grid, so if one thread does catch, the damage doesn't spread. Claws slide over it instead of pulling loops.
Water-resistant surface — splashes and light soiling wipe off with a damp cloth.
High-density grid weave that nails don't easily hook into.
Non-slip backing across the whole floor keeps it planted through turns.
Fur doesn't cling — a quick brush clears it.
02 Upgraded zippers NEW — heavier nylon tape with dual safe-lock pulls.
03 Silicone zipper covers NEW — no rattling pulls on the road.
04 Coated mesh window — air moves through, your dog still sees you.
05 Headrest anchor straps — front and rear, buckled to hold the cover square.
06 Seatbelt slot — routes a pet seatbelt tether through the cover.
The coated mesh window keeps your dog's view open on the road.
Mesh lets your car's A/C circulate through to your dog.
✓ Non-slip base keeps it — and your dog — planted.
✓ Water-resistant fabric shields against spills and accidents.
Water-resistant, not waterproof. Do not machine wash and do not tumble dry — spot-clean soiled areas with a damp cloth or mild detergent, then air-dry fully in the shade before folding it into the bag. Skip bleach and fabric softener, and avoid hard scrubbing: both break down the water-repellent finish. Storing it damp can stain the fabric. If you use heated seats, place a blanket underneath.
Anchors to the front and rear headrests, a seat-gap clip, and door-handle straps — tested to sit level and stay put. Quick fit check: compare your back seat with the size guide below.
- Unfold the base, then slide the four poles into the sleeve along the top of each wall.
- Place it non-slip side down, mesh window facing the driver.
- Buckle strap A to the front headrests; adjust until the base sits level at 90°.
- Push the seat-gap clip down between the rear seats.
- Buckle strap A to the rear headrests.
- Zip the side covers, then hook strap B onto the door handles.
- Press the base flat and take up the slack in the webbing so it can't lift.
A dedicated slot lets you route a pet seatbelt tether through the cover to your dog's harness. Pet seatbelt sold separately. This cover protects your seat — it isn't a restraint on its own, so always pair it with a proper harness and tether, and check the anchors after installing.
04 Side straps · 05 Side poles · 06 Main poles · 07 Instruction manual
It's a substantial, structured cover — that's what keeps it stable and long-lasting. It folds into the included carry & storage bag, so it stays tidy between trips.
Beige keeps the cabin light and open. Black disappears into a dark interior and hides everyday marks.
It fits most sedans and SUVs and anchors at several points. Check your back-seat bench against the dimensions below — 48 in or wider is a good fit.
Weight: 8.2 lb (3.7 kg) without bag · 8.8 lb (4 kg) with bag
Material: Polyester 100% shell & fill (ripstop weave)
Base: 9-layer construction with PP reinforcement panels
Colors: Beige · Black
Designed in Seoul · Made in China
Measurements may vary slightly unit to unit.
Fold-down passenger modes so a person can ride in the back, poles in every side wall, a nine-layer reinforced base, upgraded nylon safe-lock zippers with silicone covers, zip storage pockets, and premium ripstop fabric throughout.
Into sleeves along the top of the side walls — that's what stops them slumping inward. The floor doesn't use poles; it's the nine-layer base with PP reinforcement panels.
Water-resistant, not fully waterproof. It protects your upholstery from spills, wet fur and accidents, but it isn't rated to hold standing water.
Yes — a built-in slot routes a pet seatbelt tether through to your dog's harness. The tether is sold separately. The cover protects your seat; the harness and tether are the restraint.
Spot-clean with a damp cloth or mild detergent, then air-dry in the shade. Do not machine wash or tumble dry, and skip bleach and fabric softener.
The whole floor is backed with non-slip fabric and the cover anchors to the headrests, seat gap and door handles. On heated seats, place a blanket underneath.
Ships from our studio in Seoul, Korea — orders typically arrive in 7–14 business days. Designed in Seoul, made in China. Shipping and U.S. import duty are calculated by weight and item, and shown in full before you pay. We collect the duty upfront and pay it for you, so there's nothing to pay on delivery. 30-day returns on unused items in their original packaging.
From Pomeranians to a Jindo, sedans to SUVs — here it is in real cars, from real HOUT homes.
